Showing 1–24 of 59 resultsSorted by popularity

Electronics Module (11)

IoT (11)

Motor Driver/ESC (2)

Wheel (2)

Quadcopter (4)
Soldering Accessories (8)

Basic Components (13)

Development Boards (30)

Battery & Charger (18)

Micro Controller (26)

Motor (16)

Sensors (32)

Cables/Wires/Connectors (10)
- Nominal Voltage: 9V
- Built Quality: Leakproof Metal Jacket
- Environment-Friendly: 0% Mercury and Cadmium
- Connector Type: Corrosion-Free Press Stud Terminal
- Application: DIY Projects, Electronics, Household Devices
- Availability: Available at Circuit City BD
- Battery Type: Hybrid 18650 Li-ion
- Capacity: 2600mAh (9.62Wh)
- Voltage: 3.7V (Unprotected)
- Max Discharge Rate: 10A
- Rechargeable: Yes (Standard Charging Time: 4 Hours)
- Ideal for: Power Banks, Laptops, Flashlights, and DIY Projects
- Available at: Circuit City BD
- Material: Hard Leather, High-Quality Build
- Wire Length: 5cm, Open-Wire End for Easy Connection
- Polarity Protection: Prevents Reverse Connection & Short Circuit
- Application: Ideal for Arduino, DIY Projects, and Battery-Powered Circuits
- Availability: Available at Circuit City BD
Infrared Obstacle Detection Sensor
Detection Distance: 2 ~ 30cm
Detection Angle: 35°
LM393 Comparator for Stable Output
Works with 3.6V to 5V Power Supply
Easy Mounting with 3mm Screw Holes
Availability: Order now from Circuit City BD!
- Cable Length: 12cm (Approx.)
- Connector Type: 9V Battery Snap with DC Barrel Jack (2.1mm x 5.5mm)
- Material: High-Quality, Environment-Friendly Design
- Application: Ideal for Arduino, Microcontrollers, and DIY Projects
- Availability: Available at Circuit City BD
- Product Name: ESP-8266 (CH340) NodeMCU Lua V3
- Wi-Fi Module: Built-in ESP8266
- Power Supply: 4.5V ~ 9V (USB-powered)
- Communication: UART/GPIO interface
- Flash Size: 4MB
- Availability: Available at Circuit City BD
- ESP-32 NodeMCU 30Pin
- Dual-core WiFi + Bluetooth microcontroller
- Supports UART, GPIO, ADC, DAC, PWM, I2C, and I2S interfaces
- Built-in 32Mbit flash memory for enhanced performance
- Available now at Circuit City BD
High-quality carbon tool steel
18mm blade width with 8 snap points
Silver finish for visibility
Available now at Circuit City BD
- Compatible Battery: 3 x 18650 Li-ion Batteries
- Output Voltage: 11.1V (Series Connection)
- Material: High-Quality Plastic
- Wire Length: 15cm
- Easy to Install & Use
- Available at: Circuit City BD
- Operating Voltage: 1.5V - 15V DC
- Tone Generation Range: 1.5 kHz - 2.5 kHz
- Current Consumption: Less than 25mA
- Application: Alarms, Timers, Notifications, Sound Alerts
- Availability: Available at Circuit City BD
Compact 20W Glue Gun
Imported from China
Equipped with On/Off Switch
Ideal for DIY, Crafts, and Repairs
Available at Circuit City BD
40W Electric Soldering Iron
Durable, Scratch-Resistant Build
Easy to Use & Clean
Suitable for Home & DIY Use
Now Available at Circuit City BD
IR Remote Control & Sensor Module
Operating Voltage: 2.7V - 5.5V
Transmission Distance: Up to 8m
NEC Encoding Format
Internal PCM Filter & EMI Shielding
Battery (CR2025) Not Included
Availability: Order now from Circuit City BD!
Supply Voltage: 3.0V - 5.0V DC
Receiver Frequency: 38 KHz
Low Power Consumption & High Immunity
Internal Filter for PCM Frequency
TTL & CMOS Compatibility
Availability: Order now from Circuit City BD!
- Product Name: ESP-32 NodeMCU 30Pin Type-C
- Wi-Fi Module: ESP-WROOM-32s with IEEE 802.11 b/g/n
- Built-in Flash: 32Mbit
- Interfaces: UART, GPIO, ADC, DAC, SDIO, PWM, I2C, I2S
- Logic Level: 3.3V
- Power Supply: 5V
- Availability: Available at Circuit City BD
- Microcontroller: ATmega328 (SMD) with CH340G interface.
- Operating Voltage: Works at 5V.
- Input Voltage (Recommended): Accepts 7–12V as input.
- Input Voltage (Limit): Operates within 6–20V safely.
- Digital I/O Pins: Includes 14 pins, 6 of which support PWM output.
- Analog Input Pins: Features 6 analog input pins.
- Flash Memory: 32 KB (0.5 KB used by bootloader).
- Clock Speed: Runs at 16 MHz.
- Brand: iMAX
- Power: 80W max output
- Battery Compatibility: Li-ion, LiPo, LiFe, NiCd, NiMH, Pb
- Input Voltage: 11–18V DC (Power Adapter Required, Not Included)
- Features: Microprocessor Controlled, Individual Cell Balancing.
- Ideal for: RC Hobbyists, Drone Pilots, Robotics, DIY Electronics
- Available at: Circuit City BD
- Brand: iMAX B6-AC
- Power: 80W Discharge, 10W Charge
- Battery Compatibility: Li-ion, LiPo, LiFe, NiMH, NiCd, Pb
- Input Voltage: 100~240V AC / 11~18V DC
- Available at: Circuit City BD