Subtotal: 1,870.00৳
“Original IMAX RC B3 Pro 2s,3s LIPO Battery Charger” has been added to your cart. View cart
Showing 1–24 of 37 resultsSorted by popularity

Electronics Module (11)

IoT (11)

Motor Driver/ESC (2)

Wheel (2)

Quadcopter (4)
Soldering Accessories (8)

Basic Components (12)

Development Boards (30)

Battery & Charger (18)

Micro Controller (26)

Motor (16)

Sensors (32)

Cables/Wires/Connectors (10)
Relay Type: 1-Channel 5V Relay
Operating Voltage: 3V - 5V DC
Switching Capacity: AC 250V/10A, DC 30V/10A
Trigger Method: High-Level & Low-Level Selectable
Microcontroller Compatibility: Arduino, AVR, PIC, ARM, DSP
Availability: Order now from Circuit City BD!
- ESP-32 NodeMCU 30Pin
- Dual-core WiFi + Bluetooth microcontroller
- Supports UART, GPIO, ADC, DAC, PWM, I2C, and I2S interfaces
- Built-in 32Mbit flash memory for enhanced performance
- Available now at Circuit City BD
Channels: 4
Trigger Voltage: 5V DC
Switching Voltage: 250V AC / 30V DC @ 10A
Microcontroller Compatibility: Arduino, Raspberry Pi, PIC, AVR, ARM, etc.
High/Low-Level Trigger Modes
Availability: Order now from Circuit City BD!
- Operating Voltage: 1.5V - 15V DC
- Tone Generation Range: 1.5 kHz - 2.5 kHz
- Current Consumption: Less than 25mA
- Application: Alarms, Timers, Notifications, Sound Alerts
- Availability: Available at Circuit City BD
TDS Water Quality Sensor | Arduino Compatible | V1 Module
Measures 0–1000 ppm with ±10% Accuracy
Waterproof Probe for Long-Term Monitoring
Analog Output 0–2.3V, Wide Voltage Input 3.3V–5.5V
Available Now at Circuit City BD
Wireless Serial Bluetooth Module for Arduino & Microcontrollers
Bluetooth Specification: V2.0 + EDR
Frequency: 2.4GHz ISM Band
Modulation: GFSK (Gaussian Frequency Shift Keying)
Operating Range: Up to 10 meters
Supports Master & Slave Mode
Low Power Consumption
Availability: Order now from Circuit City BD!
Dual-Channel 5V Relay Module
Low-Level Trigger Relay
Trigger Voltage: 3.3V – 5V
Switching Capacity: 250V AC @ 10A, 30V DC @ 10A
Opto-Isolated for High Reliability
Built-in Back EMF Protection
Two LED Indicators for Relay Status
Availability: Order now from Circuit City BD
IR Remote Control & Sensor Module
Operating Voltage: 2.7V - 5.5V
Transmission Distance: Up to 8m
NEC Encoding Format
Internal PCM Filter & EMI Shielding
Battery (CR2025) Not Included
Availability: Order now from Circuit City BD!
Interface: I2C (PCF8574 Chip)
Compatible LCDs: 16×2 & 20×4 Character Displays
Power Supply: 5V DC
Adjustable Contrast & Backlight Control
Up to 8 Modules on a Single I2C Bus
Availability: Order now from Circuit City BD!
- Product Name: ESP-32 NodeMCU 30Pin Type-C
- Wi-Fi Module: ESP-WROOM-32s with IEEE 802.11 b/g/n
- Built-in Flash: 32Mbit
- Interfaces: UART, GPIO, ADC, DAC, SDIO, PWM, I2C, I2S
- Logic Level: 3.3V
- Power Supply: 5V
- Availability: Available at Circuit City BD
- Microcontroller: ATmega328 (SMD) with CH340G interface.
- Operating Voltage: Works at 5V.
- Input Voltage (Recommended): Accepts 7–12V as input.
- Input Voltage (Limit): Operates within 6–20V safely.
- Digital I/O Pins: Includes 14 pins, 6 of which support PWM output.
- Analog Input Pins: Features 6 analog input pins.
- Flash Memory: 32 KB (0.5 KB used by bootloader).
- Clock Speed: Runs at 16 MHz.
Compact & High-Precision Barometric Sensor
Measures Atmospheric Pressure & Temperature
Supports I2C & SPI Communication
Operating Voltage: 1.71V to 3.6V (Typical: 3.3V)
Pressure Range: 300 hPa to 1100 hPa
Perfect for Altitude Measurement & Weather Forecasting
Availability: Order now from Circuit City BD!
- Model: STM32F103C8T6
- Core: ARM Cortex-M3 32-bit CPU
- Clock Speed: 72MHz
- Memory: 64KB Flash, 20KB SRAM
- Power Supply: 2.0V - 3.6V
- Onboard Mini USB for Power & Communication
- Ideal for STM32 Development & Prototyping
- Available at: Circuit City BD
- Product Name: ESP8266 (ESP-01) Serial WiFi Wireless Transceiver Module
- Wi-Fi Standard: 802.11 b/g/n
- Flash Memory: 1MB
- Processor: 32-bit CPU with TCP/IP stack
- Power Efficiency: Standby power <1.0mW (DTIM3)
- Interfaces: UART, SPI, SDIO 1.1/2.0
- Applications: IoT, home automation, wireless sensor networks
- Availability: Available at Circuit City BD
Raspberry Pi 5 4GB
- Raspberry Pi 5 4GB Single Board Computer
- Superior graphics performance suitable for multimedia applications and gaming
- Versatile connectivity options including Gigabit Ethernet, dual-band Wi-Fi, and Bluetooth 5.0/BLE
- Enhanced peripherals including USB ports, RTC, and 4Kp60 display outputs with HDR support
- Compatible with Home Assistant for secure and reliable home automation
3.5 inch Raspberry Pi Display
- Resolution: 480x320, Type: TFT Display, Interface: SPI.
- Touchscreen: Resistive, Controller: XPT2046.
- Compatibility: Raspberry Pi B, B+, 2, and 3.
- Colors: 65,536, Backlight: LED.
- Dimensions: 84.91×56.54 mm, Weight: Lightweight.
- Accessories: Includes touch pen for interactivity.
Raspberry Pi Camera Module(5MP)
- Resolution: 5 MP for clear images.
- Video Support: 1080p30, 720p60, 640x480p60/90.
- Interface: CSI (Camera Serial Interface).
- Compatibility: Raspberry Pi 3 & 4 Model B.
- Plug-n-Play: Easy to set up.
- Lightweight: Compact and portable design.
- Power Efficient: Low power usage.
Raspberry Pi Camera Module V2(8MP,1080P)
- Resolution: 8MP, 3280 x 2464 pixels.
- Sensor: Sony IMX219 with fixed-focus lens.
- Video: Supports 1080p30, 720p60, 640x480p90.
- Connectivity: CSI interface with ribbon cable.
- Compatibility: Works with Raspberry Pi boards.
- Design: Compact, lightweight, beginner-friendly.
Raspberry Pi Zero 2 W
- Quad-core 1GHz CPU for smooth performance
- 512MB RAM to handle multiple tasks
- 2.4GHz Wi-Fi for easy wireless connectivity
- Mini HDMI port for video output
Raspberry Pi 5 8GB
- Model: Raspberry Pi 5, 8GB LPDDR4X RAM.
- Processor: Quad-core Cortex-A76, 64-bit.
- Graphics: 800MHz VideoCore VII GPU.
- Connectivity: Gigabit Ethernet, Wi-Fi, Bluetooth 5.0.
- Power: 5V/5A DC (PD-enabled).
- Ports: PCIe 2.0, USB 3.0/2.0, UART.
Raspberry Pi Pico
- Processor: Dual-core ARM Cortex M0+, 133MHz flexible clock.
- Storage: 264KB SRAM, 2MB onboard Flash memory.
- GPIO: 26 multifunction pins, including 3 analog inputs.
- Interfaces: 2× SPI, 2× I2C, 2× UART, 3× ADC, 16× PWM.
- Power: USB Type-C, supports 1.8–5.5V DC input.
- Product Name: ESP-8266 NodeMCU OLED Module
- Display: Integrated 0.96″ OLED
- Power Supply: 5V via Micro USB
- Compatibility: Arduino & NodeMCU (Lua for ESP8266)
- Connection: Micro USB
- Availability: Available at Circuit City BD
- Product Name: ESP-8266 NodeMCU Lua V3
- Wi-Fi Module: Built-in ESP-12E
- Power Supply: 5V (via micro USB)
- Communication: GPIO, PWM, I2C, ADC, UART, SPI
- Flash Size: 4MB
- Availability: Available at Circuit City BD