Subtotal: 1,200.00৳
Showing 1–24 of 138 resultsSorted by popularity

Electronics Module (11)

IoT (11)

Motor Driver/ESC (2)

Wheel (2)

Quadcopter (4)
Soldering Accessories (8)

Basic Components (13)

Development Boards (30)

Battery & Charger (18)

Micro Controller (26)

Motor (16)

Sensors (32)

Cables/Wires/Connectors (10)
- Connector Type: Male to Male
- Length: 20cm (8 inches)
- Material: Copper Plated
- Pin Spacing: 2.54mm (Standard)
- Flexible, Durable & Reusable
- Perfect for Breadboard & PCB Projects
- Available at: Circuit City BD
- Connector Type: Male to Female
- Length: 20cm (8 inches)
- Material: Copper Plated
- Pin Spacing: 2.54mm (Standard)
- Durable, Flexible & Reusable
- Ideal for Breadboard & PCB Projects
- Available at: Circuit City BD
- Connector Type: Female to Female
- Length: 20cm (8 inches)
- Material: Copper Plated
- Pin Spacing: 2.54mm (Standard)
- Durable, Flexible & Reusable
- Perfect for Breadboards, Sensors & Microcontrollers
- Available at: Circuit City BD
- Nominal Voltage: 9V
- Built Quality: Leakproof Metal Jacket
- Environment-Friendly: 0% Mercury and Cadmium
- Connector Type: Corrosion-Free Press Stud Terminal
- Application: DIY Projects, Electronics, Household Devices
- Availability: Available at Circuit City BD
- Battery Type: Hybrid 18650 Li-ion
- Capacity: 2600mAh (9.62Wh)
- Voltage: 3.7V (Unprotected)
- Max Discharge Rate: 10A
- Rechargeable: Yes (Standard Charging Time: 4 Hours)
- Ideal for: Power Banks, Laptops, Flashlights, and DIY Projects
- Available at: Circuit City BD
Brass Flexible Coupling for 7mm Motor Shaft
18mm Total Length, 14mm Hex Socket
Compatible with 37GB & 37GA DC Gear Motors
Lightweight & Easy to Install
Now Available at Circuit City BD
Compatible with 37GA and 37GB DC Geared Motors
Durable Metal Construction
Easy Mounting with Hex Coupler Support (Not Included)
8 Mounting Holes for Flexible Positioning
Available Now at Circuit City BD
- Material: Hard Leather, High-Quality Build
- Wire Length: 5cm, Open-Wire End for Easy Connection
- Polarity Protection: Prevents Reverse Connection & Short Circuit
- Application: Ideal for Arduino, DIY Projects, and Battery-Powered Circuits
- Availability: Available at Circuit City BD
22 AWG solid tinned copper wire
1FT length, insulated with high-grade PVC
Rated for 300V and up to 3A current
Ideal for breadboards, prototyping, and internal wiring
Available now at Circuit City BD
LED Size: 5mm
Color: Red
Lens Appearance: Transparent
Forward Voltage: 3.5V
Forward Current: 30mA
Mounting Type: Through-Hole
Availability: Order now from Circuit City BD!
Diode Type: PN Junction Rectifier
Voltage Ratings: 1000V Peak Reverse Voltage, 700V RMS
Current Rating: 1A Average Forward Current
Purpose: AC to DC Rectification
Compatibility: Works with 1N400X Series
Available at: Circuit City BD
Transistor Type: NPN
Voltage Ratings: Vce = 45V, Vcb = 50V, Veb = 6V
Current Rating: 100mA Collector Current
Gain (hFE): 110
Applications: Switching & Amplification
Available at: Circuit City BD
Brand: Generic
Tie Points: 400 (300 in main strip, 100 in power lanes)
Ideal for: Arduino, Raspberry Pi, and electronics prototyping
Build: Plastic housing, metal contact clips
Power Rating: 3–5A, 300V Max
Size: 82mm x 55mm x 10mm
Available at: Circuit City BD
- Product Name: 37GB Gear Motor 500RPM 12V
- Voltage: 12V DC
- Speed: 500 RPM
- Torque: High torque with low current consumption
- Build Quality: Metal gears, durable construction
PVC White Board | 12 x 12 inch | 5mm Thickness
Durable, Lightweight & Easy to Cut
Perfect for DIY Projects, Model Making, Robotics
Now Available at Circuit City BD – Get Yours Today!
LDR 5 mm – Light Sensitive Resistor
Resistance changes with ambient light levels
Dark resistance: 1–20 MΩ
PCB Through-Hole Mount | 2 Pins
Available now at Circuit City BD
Infrared Obstacle Detection Sensor
Detection Distance: 2 ~ 30cm
Detection Angle: 35°
LM393 Comparator for Stable Output
Works with 3.6V to 5V Power Supply
Easy Mounting with 3mm Screw Holes
Availability: Order now from Circuit City BD!
Relay Type: 1-Channel 5V Relay
Operating Voltage: 3V - 5V DC
Switching Capacity: AC 250V/10A, DC 30V/10A
Trigger Method: High-Level & Low-Level Selectable
Microcontroller Compatibility: Arduino, AVR, PIC, ARM, DSP
Availability: Order now from Circuit City BD!
Operating Voltage: 3V – 6V DC
RPM: 2000
Shaft Diameter: 2mm
Shaft Length: 10mm
Weight: 15g
Availability: Order now from Circuit City BD!
- Connector Type: Female to Female
- Quantity: 20 Wires (Rainbow Colors)
- Length: 20cm (8 inches) per wire
- Pin Header Compatibility: 2.54mm (0.1") Standard
- Flexible & Pre-Crimped for Quick Connections
- Perfect for Breadboards, PCBs & DIY Electronics
- Available at: Circuit City BD
- Connector Type: Male-to-Female
- Length: 20cm (each wire)
- Quantity: 20 wires (Rainbow colors)
- Ideal for: Breadboards, PCBs, DIY electronics
- Flexible & easy-to-use wiring solution
- Available at: Circuit City BD
- Connector Type: Male-to-Male
- Length: 20cm (each wire)
- Quantity: 20 wires (Rainbow colors)
- Ideal for: Breadboards, PCBs, DIY electronics
- Easy to use & organize
- Available at: Circuit City BD